What the Plaster Calculator does
The Plaster Calculator works out the cement and sand for plastering a wall or ceiling. Enter the wall length and height in metres or feet, take off doors and windows, then choose the thickness and the mix: 6 mm for ceilings, 12 mm for inside walls, 15 mm for rough inside walls and 20 mm for outside walls, in a 1:3 to 1:6 cement-sand mix. It gives the wet plaster volume, the cement in 50 kg bags and the sand in m³ and cft. The cement per cubic metre chart gives each mix per 10 m² and per 100 sq ft.
How to use it
- Enter the wall length and height and any openings.
- Pick the thickness and the mix.
- Set a wastage allowance, usually 5%.
- Read the cement bags and sand.
Example
Plastering 30 m² of inside wall 12 mm thick in a 1:6 mix takes 0.36 m³ of wet plaster, or 0.378 m³ with 5% wastage. The dry volume is 1.27 times that, so the cement is about 99 kg, just under 2 bags, and the sand about 0.41 m³.
Why the dry volume is larger
Dry cement and sand have air between the grains, which water fills when the mortar is mixed. Plaster also fills joints and dips in the wall. Together these are covered by taking the dry volume as 1.27 times the wet volume, a common site factor.
Richer mixes such as 1:4 are used outside, where plaster faces the weather, and 1:3 for ceilings and repairs. Inside walls usually take 1:6.
Questions people ask
Is anything I enter sent anywhere?
No. The calculator works entirely in your browser, so your measurements stay on your device.
How thick should wall plaster be?
Commonly 12 mm on brick walls inside, 15 mm on rough surfaces and 20 mm outside, often in two coats.
How much cement is in 1 m² of 12 mm plaster in 1:6?
About 3.1 kg before wastage.
Does it work for gypsum plaster?
No. Gypsum is sold in bags with a coverage per bag, so use the maker’s figure.