What the Concrete Calculator does
The Concrete Calculator turns the size of a slab, footing, beam or round column into the materials you need to order. Enter the dimensions in metres or feet, pick a grade such as M20, and it gives the concrete volume in cubic metres, cubic feet and cubic yards, then the cement in 50 kg bags, the sand and aggregate in m³ and cft, and the water for a water-cement ratio of 0.5. A wastage allowance covers spillage and uneven formwork. For a quick chart of every grade, see cement per cubic metre.
How to use it
- Choose metres or feet, and the shape: slab, footing or beam, or a round column.
- Enter the length, width and thickness, or the diameter and height, and the number of identical pieces.
- Pick the grade of concrete, or type your own ratio such as 1:2:4.
- Set the wastage, usually 5%, and read the cement bags, sand and aggregate.
Example
A slab 5 m long, 4 m wide and 150 mm thick holds 3 m³ of concrete, or 3.15 m³ with 5% wastage. In M20 (1 : 1.5 : 3) that needs about 25.4 bags of cement (1,270 kg), 1.32 m³ of sand (46.7 cft), 2.65 m³ of aggregate (93.4 cft) and about 635 litres of water.
How the materials are worked out
Dry cement, sand and aggregate shrink when water is added and the mix is compacted, so the dry volume is taken as 1.54 times the wet volume. That dry volume is split in the ratio of the mix. In M20, 1 + 1.5 + 3 = 5.5 parts, so cement is 1 ÷ 5.5 of the dry volume. Cement weighs about 1,440 kg per m³, which gives the number of 50 kg bags.
The M grades are nominal mixes, as listed in IS 456. For M20 and above in structural work, engineers usually use a design mix tested for the materials on site, which can use less cement for the same strength.
Cement, sand and aggregate for 1 m³ of concrete
Using the same method, before wastage:
- M10 (1 : 3 : 6): 4.4 bags of cement, 0.46 m³ sand, 0.92 m³ aggregate.
- M15 (1 : 2 : 4): 6.3 bags, 0.44 m³ sand, 0.88 m³ aggregate.
- M20 (1 : 1.5 : 3): 8.1 bags, 0.42 m³ sand, 0.84 m³ aggregate.
- M25 (1 : 1 : 2): 11.1 bags, 0.39 m³ sand, 0.77 m³ aggregate.
Questions people ask
Is anything I enter sent anywhere?
No. The calculator works entirely in your browser, so your measurements stay on your device.
How many cement bags are in 1 m³ of M20 concrete?
About 8 bags of 50 kg using the nominal 1 : 1.5 : 3 mix and the 1.54 dry factor.
What thickness should I use for a house slab?
Roof slabs in homes are often 125 to 150 mm thick, but the right thickness depends on the span and loads, so follow your structural drawings.
Does it include steel?
No. Use the Steel Weight Calculator for the rebar, from the bar sizes and lengths in your bar bending schedule.