Brick Calculator

Count the bricks for a wall from its size, the brick size and the mortar joint, with the cement and sand for the mortar.

Runs in your browserNo sign-upWorks offline

The tool is loading…

What the Brick Calculator does

The Brick Calculator works out how many bricks a wall needs from its length and height, the brick size and the mortar joint. It handles half brick and one brick walls, the common Indian modular (190 × 90 × 90 mm) and traditional (230 × 110 × 75 mm) sizes, or any custom size, and takes off the area of doors and windows. It also gives the mortar volume and the cement and sand for a 1:4, 1:5 or 1:6 mix, with a wastage allowance for broken bricks. The cement per cubic metre chart lists each mortar mix per m³.

How to use it

  1. Choose metres or feet and enter the wall length and height.
  2. Add the area of doors and windows if the wall has openings.
  3. Pick the brick size, the mortar joint (usually 10 mm) and the mortar mix.
  4. Choose a half brick or one brick wall and read the number of bricks.

Example

A one brick wall 10 m long and 3 m high in modular bricks is 200 mm thick, so it holds 6 m³ of brickwork. Each brick with its joint takes 0.2 × 0.1 × 0.1 = 0.002 m³, so the wall needs 3,000 bricks, or 3,150 with 5% wastage. The mortar is about 1.38 m³ wet, which in a 1:6 mix needs about 7.6 bags of cement and 1.58 m³ of sand.

The volume method

Bricks = volume of brickwork ÷ volume of one brick with its mortar joint. The rest of the wall, between the bricks, is mortar. Mortar shrinks as it sets and fills gaps, so its dry volume is taken as 1.33 times the wet volume, then split by the mix ratio.

A half brick wall is one brick wide and is used for partitions. A one brick wall is as thick as a brick is long and is used for outside and load-bearing walls.

Questions people ask

Is anything I enter sent anywhere?

No. The calculator works entirely in your browser, so your measurements stay on your device.

How many modular bricks are in 1 m³?

About 500, since each brick with a 10 mm joint takes 0.002 m³.

How many bricks do I need for 1 m² of wall?

With modular bricks, about 50 for a half brick wall (100 mm) and 100 for a one brick wall (200 mm), before wastage.

How much wastage should I allow?

Usually 5%, more for hand-made bricks or walls with many cuts and openings.

Which mortar mix should I use?

A 1:6 cement-sand mix is common for ordinary walls, and 1:4 for load-bearing or exposed work. Follow your engineer’s specification.

Related tools