What the Voltage Drop Calculator does
The Voltage Drop Calculator works out how much voltage is lost along a cable. Choose metric sizes in mm² with lengths in metres, or AWG with lengths in feet, then the supply type, the conductor, the cable size, the supply voltage, the current and the one-way length. It gives the drop in volts and as a percentage of the supply, the voltage left at the load, and whether the drop is within the common 3% and 5% limits. It also warns when a copper cable is carrying more than its typical current rating.
How to use it
- Choose mm² or AWG and the supply: single phase, three phase or DC.
- Pick copper or aluminium and the cable size.
- Enter the supply voltage, the current and the one-way cable length.
- Read the drop and the verdict.
Example
A 2.5 mm² copper cable 20 m long carrying 16 A on a 230 V single-phase supply drops about 5.3 V, which is 2.3%, leaving about 224.7 V at the load. That is within 3%.
The formula
Current flows out along one conductor and back along the other, so a single-phase or DC drop is 2 × current × length × resistance per metre. A balanced three-phase circuit uses √3 instead of 2, with the line-to-line voltage such as 415 V. Resistance is worked out from the conductor’s resistivity at 70 °C, its working temperature, which gives a higher, safer figure than the cold value.
Cable reactance is left out, which errs on the safe side for the small and medium cables in homes and small buildings. Above about 50 mm² it starts to matter, and cable makers’ mV/A/m tables should be used.
Questions people ask
Is anything I enter sent anywhere?
No. The calculator works entirely in your browser, so your measurements stay on your device.
What voltage drop is acceptable?
Commonly 3% for lighting and 5% for other circuits, measured from the supply to the furthest load. Your local wiring rules set the exact limits.
Why does aluminium drop more?
Aluminium has about 1.6 times the resistance of copper for the same size, so it needs a larger cable for the same drop.
Should I enter the length one way or both ways?
One way. The calculator doubles it for the return path.