Ohm’s Law Calculator

Find voltage, current, resistance or power from any two of them, with the answer in mA, kΩ and other handy units.

Runs in your browserNo sign-upWorks offline

The tool is loading…

What the Ohm’s Law Calculator does

The Ohm’s Law Calculator solves the basic relationship between voltage, current, resistance and power. Fill in any two of the four boxes and it works out the other two, showing every value with a convenient prefix such as mA, kΩ or mW. It is handy for choosing a resistor for an LED, checking the current a heater draws, or homework in physics and electronics.

How to use it

  1. Type any two known values: voltage, current, resistance or power.
  2. Leave the other two boxes empty.
  3. Read the missing values and all four together.

Example

12 V across a 6 Ω resistor drives 12 ÷ 6 = 2 A and dissipates 12 × 2 = 24 W. For an LED on a 5 V supply that drops 2 V at 20 mA, the resistor must drop 3 V, so R = 3 ÷ 0.02 = 150 Ω, dissipating 0.06 W.

The formulas

Ohm’s law is V = I × R: voltage equals current times resistance. Power is P = V × I. Combining the two gives P = I² × R and P = V² ÷ R, so any two of the four values fix the other two.

Type small and large values in base units: 20 mA as 0.02 and 4.7 kΩ as 4700. The answers are shown with prefixes so they are easy to read.

Questions people ask

Is anything I enter sent anywhere?

No. The calculator works entirely in your browser, so your measurements stay on your device.

What resistor power rating should I buy?

At least double the calculated power. A 0.06 W load is fine on a common 0.25 W resistor.

Does Ohm’s law work for AC?

For resistive loads such as heaters, yes, with RMS values. Motors and electronics have reactance, so current also depends on the power factor.

Why can I only enter two values?

Two values fix the other two. A third could contradict them, so the calculator asks for exactly two.

Related tools