Resistor Colour Code Calculator

Read the value of a 4, 5 or 6-band resistor from its colours, or find the colour bands for a value, with tolerance and a drawing.

Runs in your browserNo sign-upWorks offline

The tool is loading…

What the Resistor Colour Code Calculator does

The Resistor Colour Code Calculator reads the coloured bands on a through-hole resistor. Choose 4, 5 or 6 bands and pick each colour, and it shows the resistance, the tolerance, the range the real value can fall in and, for 6 bands, the temperature coefficient, with a drawing of the resistor. It also works the other way: type a value such as 4.7k, 4k7 or 1M and it shows the bands for a 4-band and a 5-band resistor.

How to use it

  1. Choose Colours to value or Value to colours.
  2. For colours, pick the number of bands and each band in order.
  3. For a value, type it with k or M and pick the tolerance.
  4. Read the value or the colours, and check them against the drawing.

Example

Yellow, violet, red, gold reads 4, 7, × 100, ±5%: 4,700 Ω or 4.7 kΩ, anywhere from 4.465 to 4.935 kΩ. A 5-band brown, black, black, red, brown resistor is 1, 0, 0 × 100 = 10 kΩ at ±1%.

How to read the bands

Hold the resistor with the bands bunched towards the left; the tolerance band, often gold or silver, is usually set apart on the right. On a 4-band resistor the first two bands are digits, the third is the multiplier and the fourth the tolerance. Five and six-band resistors have three digits, and the sixth band gives the temperature coefficient.

The digits run black 0, brown 1, red 2, orange 3, yellow 4, green 5, blue 6, violet 7, grey 8, white 9. A gold multiplier divides by 10 and silver by 100. The colours are set by the standard IEC 60062.

Questions people ask

Is anything I enter sent anywhere?

No. The calculator works entirely in your browser, so your measurements stay on your device.

Which end do I start from?

The end with the bands closest to the edge. If unsure, a gold or silver band is never the first band.

Why is my value not available?

Colour codes show only 2 or 3 significant digits, so values like 4.75 kΩ need a 5-band resistor and 4.753 kΩ cannot be shown.

What does tolerance mean?

How far the real value may differ from the marked value: a 1 kΩ resistor at ±5% can be 950 to 1,050 Ω.

Related tools