About these tools
The construction calculators estimate materials for building and renovation work, using the common rules of thumb on Indian sites: nominal concrete mixes, 50 kg cement bags and metric or imperial sizes. They are for planning and ordering; an engineer’s design takes priority for structural work.
Start with the Concrete Calculator for slabs, footings and columns, and the Brick and Plaster Calculators for walls, which also give the cement and sand for mortar. The Steel Weight Calculator turns bar sizes and lengths into kilograms for ordering, and the Tile and Paint Calculators work out boxes of tiles and litres of paint from the room size, with wastage. The Stair Calculator finds a comfortable riser height and tread depth for a given floor-to-floor height. For quick figures without entering sizes, see the cement per cubic metre chart.
For better estimates, measure in one unit system throughout and convert only at the end. Add wastage: about 5 to 10% for tiles, more for diagonal layouts, and around 5% for bricks to allow for breakage. Concrete volume should be the wet volume you need in place; the calculator converts it to dry materials for you. Check the mix ratio your engineer has specified before ordering, because M20 uses noticeably more cement than M15. Buy paint for two coats on new plaster, and round up to whole bags, boxes and tins, since a shortfall later can mean a slightly different batch or colour. For quick reference without entering sizes, the cement per cubic metre chart lists cement bags, sand and aggregate for common mixes.