Wire Size Calculator

Find the smallest cable size for a load and distance that keeps the voltage drop in limits and carries the current, in mm² or AWG.

Runs in your browserNo sign-upWorks offline

The tool is loading…

What the Wire Size Calculator does

The Wire Size Calculator picks the smallest standard cable for a circuit. Enter the load in watts or amps, the supply voltage and type, the one-way cable length and the largest voltage drop you allow. It checks each standard size in turn and returns the first that keeps the drop within your limit and, for copper, carries the current according to common rating tables. It also shows which of the two limits decided the size.

How to use it

  1. Choose mm² or AWG and the supply type.
  2. Enter the load in watts with its power factor, or the current in amps.
  3. Enter the voltage, the one-way length and the largest drop allowed.
  4. Read the smallest suitable size and the deciding limit.

Example

A 3,000 W load at 230 V single phase with a power factor of 0.9 draws about 14.5 A. Over 25 m of copper cable with a 3% limit, 1.5 mm² would drop 4.3%, too much, while 2.5 mm² drops 2.6% and is rated about 24 A, so 2.5 mm² is the answer, decided by voltage drop.

Two limits on cable size

A cable must carry its current without overheating, which sets a minimum size from rating tables, and it must not lose too much voltage over its length, which sets another. On short runs the current rating usually decides; on long runs the voltage drop does.

For mm², the ratings follow BS 7671 Table 4D2A, reference method B: PVC insulated copper cable in conduit on a wall. For AWG, the 75 °C column of NEC Table 310.16 with the limits for small conductors. Cables bunched together, run through hot spaces or buried in insulation carry less, and the protective breaker must match the cable.

Questions people ask

Is anything I enter sent anywhere?

No. The calculator works entirely in your browser, so your measurements stay on your device.

What size wire for a 16 A socket circuit?

Often 2.5 mm² copper in homes, if the run is short enough for the voltage drop. Check with the calculator and your local rules.

Does it work for aluminium?

It sizes aluminium by voltage drop, but you must check the current rating in the cable maker’s table.

Can I rely on this for my installation?

Use it to plan. A licensed electrician must confirm the cable, breaker and installation method against local rules.

Related tools