Dilution Calculator

Work out how to dilute a stock solution with C1V1 = C2V2: the stock volume, final concentration or volume, and the solvent to add.

Runs in your browserNo sign-upWorks offline

The tool is loading…

What the Dilution Calculator does

The Dilution Calculator applies the dilution equation C1 × V1 = C2 × V2, where C1 and V1 are the concentration and volume of the stock and C2 and V2 those of the final solution. Choose which of the four you want, fill in the other three, and it gives the answer along with a ready-to-follow recipe: how much stock to take and how much solvent to add. It works with any concentration unit, from molar and millimolar to percent, mg/mL and ppm.

How to use it

  1. Choose what to find, usually the stock volume V1.
  2. Enter the other three values.
  3. Pick the concentration and volume units; both concentrations share one unit.
  4. Follow the recipe: stock volume plus solvent.

Example

To make 100 mL of 1 M solution from a 10 M stock, take 1 × 100 ÷ 10 = 10 mL of stock and add 90 mL of water. That is a 1 : 10 dilution, or tenfold.

Why C1V1 = C2V2 works

Adding solvent spreads the same amount of solute through a bigger volume. The amount of solute, concentration times volume, is the same before and after, so C1V1 equals C2V2. It follows that a dilution can only lower the concentration, never raise it.

For very accurate work, measure the stock with a pipette and make up to the final volume in a volumetric flask rather than adding a measured amount of water, since volumes of some liquids do not add exactly.

Questions people ask

Is anything I enter sent anywhere?

No. The calculator works entirely in your browser, so what you type stays on your device.

Can I use percent concentrations?

Yes, as long as both concentrations are in percent. The equation works with any unit used on both sides.

What is a serial dilution?

Repeating the same dilution step several times, such as 1 : 10 four times to reach 1 : 10,000. Run the calculator once per step.

What is a dilution factor?

The stock concentration divided by the final one. A factor of 10 means the final solution is a tenth as strong.

Related tools